You are unable to print stock labels for certain stock lines because the following prompts appear:

These prompts occur when a stock line does not have a label design selected for shelf/product labels or shelf talkers.

Configure the Label 

1. Go to Z Office > Stock > Manage Stock
   
2. Double-click the relevant stock line that brings up the prompt.
3. The Edit Stock Line Details window will appear. Go to the Printing tab
   
4. Under Printing Details, select the label designs for the relevant stock label types. The page layouts should automatically populate according to the designs selected.
5. Press to save the changes

If you are unsure what label design you use, check the settings in a stock card that prints labels and copy the settings. You can also check your label design or create a new one using the Label Designer.

Bulk Editing Label Configuration

If you would like all stock or certain stock types to have the same label configuration, you can bulk edit them to ensure that this setting is not missed.

1. Go to Z Office > Stock > Manage Stock
   
2. Set a filter on the left side of the screen if you want to edit a specific stock type/department/group etc. Press Apply next to Advanced Filter to apply the filters:
   
3. To bring up all stock lines, press  next to the search bar with no filters applied.
4. Press CTRL + A on the keyboard to highlight all the filtered stock cards.
5. Right click and press Bulk Edit:
   
6. The Bulk Edit Stock Line Details window should appear:
   
7. Go to the Printing tab
   
8. Under Printing Details, set the Shelf/Product Label or Shelf Talker Label as needed.
9. Press to apply the settings to the stock.